IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 77)

Quick Start Guide
69
CHAPTER 6
Checking your IIS
Setup
After you setup your system and install IntelliTrack software, check your
IIS setup at the Batch Utility before you install the CE Batch application on
the device.
Reaching the Batch Synchronization Utility
Note: The Batch Synchronization Utility is reached through the Start menu
or the workstation. For instructions on installing ISRP, please refer to
“Installing your Application” on page 39.
After the workstation installation is complete, you may access the ISRP
Batch Synchronization Utility through the Start menu.
1. To open the ISRP Batch Utility, click Start > All Programs > Intelli-
Track > ISRP > ISRP Application > Batch Terminal Communica-
tions.
2. Log into the application at the Login dialog. Enter a valid user name
and click ok. For demo mode, enter Admin as the user name.
3. The ISRP Batch Utility appears.
Sync URL Setting
The Sync URL setting is the network path to the remote server/IIS location.
It is listed in the Preferences portion of the ISRP Batch Synchronization
Utility.
You must enter the correct Sync URL setting (the network path to the IIS
server location) in the ISRP Batch Synchronization Utility. The setting
depends upon your RDA configuration, please refer to “RDA Configura-
tion” on page 29.
ISRP_QS_C.book Page 69 Friday, July 8, 2011 3:44 PM