IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 9)

Quick Start Guide
1
CHAPTER 1
Getting Started
Welcome to IntelliTrack ISRP (Inventory, Ship, Receive, Pick) software.
Your software contains the workstation application and the CE Batch Por-
table application.
The ISRP CE Batch application is included with your ISRP software. The
ISRP CE Batch application is installed on a portable device. When you use
the ISRP CE Batch application, you are able to perform application func-
tions such as inventory counts and order processing from a portable device.
Because you are using a batch device, you must use Microsoft ActiveSync
or Windows Mobile Device Center (WMDC) software to connect the PC to
the device and perform workstation application data download to the
device and batch application data upload from the device via this connec-
tion. IntelliTrack software uses remote data access (RDA) for workstation
and CE batch database communication. If you plan to use ISRP CE Batch,
you must perform installation prerequisites. These important prerequisites
should be completed BEFORE you install ISRP. Please refer to
“ISRP CE
Batch Setup” on page 17 .
ISRP_QS_C.book Page 1 Friday, July 8, 2011 3:44 PM