IntelliTrack Check In/Out - Manual (Page 26)

I NTELLI T RACK C HECK I N O UT RF V 8.1
User Manual
16
5. Enter the host address (i.e., the address of the computer running the RF
server) in the Address field.
6. The Port setting should be 23 (the default setting). If the setting is
another number, enter 23 in the Port field.
7. Click OK to save the Host Profile.
Modifying the Local Echo Setting
Once the host profiles are configured, turn on the Local Echo setting.
1. Open the Wavelink application again. Click the Host Profiles button
found in the Configuration section of the Wavelink Product Configu-
ration screen. Select the DMS RF profile that you configured. At the
Host Profiles screen, click the Configuration tab to bring this tab to the
front.