Verifying settings on the telnetce client, Connecting to the rf server, Verifying settings on the telnetce client 26 – IntelliTrack Check In/Out User Manual
Page 36
I
NTELLI
T
RACK
C
HECK
I
N
O
UT
RF
V
8.1
User Manual
26
Application & Config button to send both the Wavelink application
and the RF Telnet configuration files to the device.)
2.
If your device is not connected to the PC, a dialog appears indicating
that you must connect the device to the PC.
Connecting to the RF Server
1.
Turn on the Falcon 4420 device or the Symbol MC 9000 device. You
will see a Wavelink icon on the device desktop.
2.
Make sure the device is connected to the PC that contains the Wavelink
configuration settings for RF Telnet. Double-click the Wavelink icon
to launch the application and connect to RF Server.
3.
A blank screen appears. Enter STARTRFS and then tap Enter to con-
nect to the RF Server.
4.
Once the RF Server connection is established, enter your IntelliTrack
RF Login.
If you have trouble establishing a host connection on the handheld device,
please refer to the following sections:
“Checking your Device-PC Connec-
and
“Verifying Settings on the TelnetCE Client” on page 26
Verifying
Settings on
the TelnetCE
Client
Important: If you receive a “No Host Connection” message when you
open the WaveLink Telnet session on your handheld device, and you are
sure the device is connected to the PC, use this section as a troubleshoot-
ing tool for verifying your Telnet settings on the handheld.
If you receive a “No Host Connection” message when you open the
WaveLink Telnet session on your handheld device, your host profile and
emulation settings may have not successfully transferred to the TelnetCE
Client application.
You are able to view the host profile settings and the emulation parameters
on the TelnetCE Client. This allows you to verify the host profile and emu-
lation parameter settings in the TelnetCE client. If the settings did not
transfer successfully, you may change them in the TelnetCE client.
Important: We do not recommend changing the host profile and emula-
tion parameter settings in the TelnetCE Client unless you find out that the
settings from the TelnetCE Client installation utility did not transfer to the
TelnetCE Client.