IntelliTrack Check In/Out User Manual
Page 37
Chapter 2
Device Setup
27
1.
Turn on the Falcon 4420 device or the Symbol MC 9000 device. You
will see a Wavelink icon on the device desktop.
2.
Double-click the Wavelink icon to launch the application and connect
to RF Server.
3.
If you receive a “No Host Connection” message, select Term > Con-
figure > Emulation. An Input Password dialog box appears.
4.
The system contains a default emulation password; it is config. In the
Input Terminal Config Password field, enter the default system pass-
word: config.
5.
Select OK to close the dialog box.
6.
The Settings dialog box for the session appears. Tap the VTXX tab to
bring this portion of the dialog box to the front. Be sure the Local Echo
check box is marked; this indicates that Local Echo is turned enabled
(or on).
7.
Click OK to close the Settings dialog box and return to the Main win-
dow.
8.
Select Term > Configure > Host Profiles. An Input Password dialog
box appears.
9.
The system contains a default host profiles password; it is system. In
the Input Host Config Password field, enter the default system pass-
word: system.
10.
Select OK to close the dialog box.
11.
The Edit Host Profile dialog box appears. Select the host profile name
that you want to verify. Make sure the host profile settings match what
you entered in the Host Profiles screen in the TelnetCE installation util-
ity on the PC. (Please refer to
“Configuring the Host Profiles” on
for information about the Host Profiles screen in the TelnetCE
installation utility.)
The name entered in the Alias field of the Edit Host Profile dialog box
is the host profile name; it must match the host profile name entered in
the Name field of the Host Profiles screen\Host tab of the TelnetCE
installation utility on the PC.
The Address entered in the Address field of the Edit Host Profile dia-
log box is the IP address of the computer running the RF server; it must
match the IP address entered in the Address field of the Host Profiles
screen\Host tab of the TelnetCE installation utility on the PC.
The port entered in the Port field must match the port entered in the
Host Profiles screen\Host tab of the TelnetCE installation utility on the
PC. You must use the default port setting of 23.