IntelliTrack Check In/Out - Manual (Page 31)

Chapter 2
Device Setup
21
You may turn on these settings from the termcfg.bin-CFGMgr screen (see
“Configuring the Emulation Parameters” on page 20 ).
1. To modify the Local Echo setting, click the plus sign (+) next to the
Emulation folder found in the navigation tree in the left pane of the
termcfg.bin-CFGMgr screen. The contents of this folder display. Next,
click the plus sign (+) next to the VT and HP folder. The contents of
this folder display. Next, click the plus sign (+) next to the Common
folder. The contents of this folder display. Next, click the plus sign next
to the Local Echo file to view the Local Echo setting. Local Echo is
turned off by default.
2. If Local Echo is turned off, you must turn it on. To turn on Local Echo,
select Local Echo and right-click. A right-click menu appears.
3. Select Edit from the right-click menu. A Local Echo dialog appears.
Navigation
Tree