JuiceGoose iP 1 (Piwi) - Manual (Page 13)

RAW TCP CONTROL
It is possible to control and monitor iP-1 over Ethernet using raw TCP protocol.
In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP-1 over a
TCP/IP connection using a suitable TCP/IP client program. Once the connec-
tion is made, the console commands (see page 15) are available to the user
over TCP/IP as if the user was connected to IP-1 over the local serial connec-
tion.
By default, TCP feature is disabled due to security reasons. This can be en-
abled through the web interface. The default TCP port is 33333; this can also
be changed through the web interface.
To enable TCP feature, click on the In Wall iP Management link on the web
interface and then click on Configuration tab. Mark the button called Enable in
the TCP section. Change the default TCP port, if needed.
Page 12