JuiceGoose iP 1 (Piwi) - Manual (Page 14)

To connect to IP-1 over TCP, simply start your TCP client program ( such as
Hercules or PuTTY) and specify the IP address of the iP-1 and the TCP port.
Start the connection ( many programs have a Connect button to start the con-
nection ) and type iP-1 console commands such as Help. You should see the
reply to the command on the TCP client terminal window. See page 15 of this
manual for a full list of the console commands available.
Instead of a dedicated client program, it is also possible to use Telnet command
to establish the connection. For example, from Windows command prompt,
type:
telnet <IP Address> <Port>
where <IP Address> is the address of the iP-1 to connect and <Port> is the
TCP port to use.
Example: telnet 192.168.1.22 33333
Note: If there is no activity on the console for 10 minutes the TCP connection
will be closed automatically.
Page 13