JuiceGoose iP 1 (Piwi) - Manual (Page 2)

INTRODUCTION
iP-1
WEB BASED REMOTE POWER CONTROL
The Juice Goose iP-1 is a microcontroller based power distribution device that
can be accessed via intranet or internet communications using Ethernet con-
nection. With this remote access, individual AC receptacles can be turned on
and off and AC power receptacles can be monitored for electrical current flow.
The iP-1 has a 15 amp capacity .
SAFETY PRECAUTIONS
The iP-1 is to operate at 120 volts, 60 hertz. Operation with any voltage or fre-
quency other than that can damage the equipment and create an unsafe situa-
tion.
CAUTION #1: This device must be grounded. Failure to ground the device
could expose the user to dangerous electric shock.
CAUTION #2: This device should be installed only by qualified electrical techni-
cians using appropriate mounting hardware and correct installation techniques.
When installing make sure main power is off.
CAUTION #3: Do not expose the iP-1 to moisture or salty air. Doing so could
cause significant damage and create an unsafe condition.
DISCLAIMER
Juice Goose shall under no circumstances be held responsible for any losses,
damage, or injury resulting directly or indirectly from the use of the iP-1 device
in a manner contrary to accepted safe operating methods or any instructions
contained in this document. The user should determine prior to use whether this
product is adequate, suitable and safe for the application intended. Since indi-
vidual applications can be subject to extreme variation Juice Goose makes no
representation or guarantee as to the suitability of the iP-1 for any generally
described application.
Page 1