JuiceGoose iP 1 (Piwi) - Manual (Page 3)

QUICKSTART GUIDE
1. Unbox the unit. The box should contain: iP-1, a 3 gang electrical box , a
manual, warranty card and Juice Goose promotional material. You will
need a standard CAT5 network cable if attaching to a router, a CAT 5/6
crossover cable if connecting directly to a PC (cables are not provided with
this unit).
2. Ensure your PC is on and booted up and the iP-1 has been installed by
a qualified electrician and is connected to your network.
3. The iP-1 will take about 30 seconds to boot up and configure itself when
power is restored after installation at which point the Network light on the
front of the unit will illuminate, indicating network connectivity. If the Net-
work light blinks or does not light at all check the cable connections.
5. Open up your web browser and type in the following default IP address
to access the iP-1 on your network : http://juicegoose.
6. At this point you will be prompted to log into the iP-1.
Initial login will be:
Username: admin
Password: juicegoose
7. You will be presented with the control section where you can control the
iP-1’s PODS by clicking on the buttons or using the Sequence field by en-
tering the value in seconds and clicking the Sequence UP button.
8. To setup a specific IP address, change passwords for the admin/user
account or configure other advanced features of the iP-1 click on the ‘In
Wall IP Management’ link at the top right of the displayed page. You will
need to be logged in as admin to access this section. This section is de-
scribed in more detail beginning on page 6.
See your system administrator, if you have one, for help with configuration.
Page 2