LEESON Chassis Mount SCR Control - Manual (Page 35)

29 Operation SPEEDMASTER™ OPERATION MANUAL
All drives
If the motor or drive does not perform as described, disconnect
the AC line voltage immediately. Refer to
Troubleshooting,
page 49, for further assistance.
Meter header block (174311 and
M174007.OO drives only)
To supply power to external devices, the Meter header block
can supply an unregulated +9 VDC (5 mA maximum current)
signal when the motor and the power supply of the drive are fully
loaded. More current is available with less motor loading. Meter
can supply an unregulated +15V (10 mA maximum current)
signal in typical applications.