LevelOne FCS-9900 - Manual (Page 34)

34
6. Choose an indicator.
7. When the device is a camera select Show Coverage Area to set the Range and Radian.
8. Click Apply to… if you need to apply settings to other camera indicators.
9. Click OK.
10. The device indicator will appear on the map. Drag it to the required location.
To drag a device indicator to a map from ServerView:
1. Ensure that the map you want is displayed.
2. Click on the ServerView window.
3. Directly drag a device to the desired location on the map.
If you are in MapView and click on a device which has already been added to a map, the map for that
device will be displayed.
To remove a device indicator from a map:
1. Right-click the indicator.
2. Click Delete.
3. Click Yes in the confirmation window.
Edit Device Indicators
An indicator image can be rotated, mirrored, or changed. The image can also be set to refer to a different device than the
one originally chosen.
To rotate a device indicator to a preset angle:
Once a device indicator has been added or dragged to a map, the indicator image can be rotated. This is useful to show
which direction a camera is pointing.
5
6
7