LevelOne FCS-9900 - Manual (Page 87)

87
10. Click on the Digital PTZ button to enable Digital PTZ. Zoom in and out with your mouse wheel and drag to
Pan / Tilt.
11. If the camera supports ImmerVision Lens and was correctly configured in Main Console, the Switch to
ImmerVision button will appear. Click on the arrow to select between Original / Quad Mode / PTZ Mode
/ Parameter Mode.
To backup recorded video:
1. Right-click on the metadata indicator, or on the metadata icon in the MapView display.
2. Click Backup recorded video.
3. In the Remote Backup Recorded Video window, choose a directory for the backup by pressing the URL button
and browsing to the directory you want.
4. Setup the Time Zone and use setting Start/End Time to select a period.
5. Use the checkboxes to select which cameras to back up video for.
6. Click on OK to start backup.
Output Device Alarm Menu
The Force Output command appears on the device alarm menu for output devices.
To force output:
1. Right-click on the indicator for the output device, or on the output device’s icon in the MapView display.
2. Click Force Output. A signal is sent to trigger the output device.
Server Alarm Menu
The Backup Record Video and Open Remote Desktop commands appear on the device alarm menu for servers.
To back up recorded video:
1. Right-click on the indicator for the server, or on the server’s icon in the MapView display.
2. Click Backup recorded video.
3. In the Remote Backup Recorded Video window, choose a directory for the backup by pressing the URL button
and browsing to the directory you want.
4. Setup the Time Zone and use setting Start/End Time to select a period.
5. Use the checkboxes to select which cameras to back up video for.
6. Click on OK to start backup.