LevelOne FCS-9900 - Manual (Page 43)

43
 You can pick from two Close Alarm options. If you want the alarm to close automatically when the triggering
event ends, check Auto Close Alarm. You can also set a timer for the alarm to close automatically after a
couple seconds.
 If you want to record video locally whenever this alarm is triggered, check Recording on CMS Client.
To enable recording on CMS Client, you must check Recording on the Client under Edit – CMS Client
Setting – Record Setting. See page 26 for details.

 If you do not want to put the alarm into effect straight away, check Disable Alarm.
 If you want, click Alarm Management Guide and enter text. This text appears in the alarm detail window (see
page 68). The text also appears when users point to a device for which the alarm is active.
6. Select options in the Auto Notify (CMS Client) area:
 If you want the map window to automatically display the map for the alarm’s source device, select Go to Map
Layer. User can click on icon to stop this function when day to day use.
 For a camera alarm event, if you want a live video window from that camera to pop up, select Popup Live Video
Window. Up to three live video windows can be open at a time. User can click on icon to stop this function
when day to day use.
 If you do not want to send the video of an alarm source camera and a related camera to matrixes, check Disable
to Matrix button .
 If you do not want alarm events to replace old events on the Matrix if the Matrix is full and users do not close old
events, check the Disable Matrix Popup button .
CMS system will auto filter the same alarm of one camera, it can’t allow one alarm of a camera to use
more than one popup live video windows.
 If you want a sound to play when the alarm is triggered, check the Play Sound box, then click the URL button
and browse to a sound file.
 For a camera alarm event, if you want the camera’s video feed automatically sent to a matrix, choose a matrix
from the Send to Matrix drop-down list and a Group. If a related camera is selected, you can also choose to
Show Related Camera to Matrix by checking that box.
The options of this section, Go to Map Layer, Popup Live Video Window, Play Sound, Send to Matrix,
and Show Related Camera on Matrix settings apply only to one computer. If users run the CMS Client on
another computer, they will have to configure the settings for that computer. To use Send to Matrix and
Show Related Camera on Matrix, a matrix must be configured (see page 47), and that matrix must be set
to Allow Show Video on Event (see page 90).
7. Select options in the Auto Notify (CMS Server) area:
 If you want the server to send an automatic email to users when an alarm event happens, click the Email button
and then select users.
 If you want the server to send an automatic SMS message to users when an alarm event happens, click the
SMS button. The text of the message is [Alarm Name] on [Date/Time].
To configure the server’s GSM modem and email settings (including email content), see page 44.
8. In the Source Device area, select the device/s which will trigger this alarm.
9. In the Event Message area, select the event/s which will trigger this alarm.