LevelOne FCS-9900 - Manual (Page 50)

50
6. Click to switch between different matrix grids.
7. Click to assign alarm video channels to show video on event. You are able to define up to 16 different
groups indicated with 16 different colors under Group Setting.
By Clicking on the grids, you assign them as alarm video channels which will display
alarm associated video when alarms are triggered. The corner of the grid will be
marked with colors that stand for different groups (refer to picture on the right).
For Alarm Configuration, please refer to p. 43 for details.
Note that if no grids are reserved for alarm videos, they cannot be displayed in the matrix. A notification
will be shown in the status bar on the bottom of the CMS Client window.
Maximum channels for each view is 64 chn. This includes those in Grid Tour. Refer to the next section
for more info on Grid Tour.
8. Set Camera Tour Interval.
When the number of cameras exceeds the number of Matrix grids, Camera Tour will be activated.
Camera Tour does not involve changes of Matrix grids. For example, if you assign 12 cameras into a 3x3,
9 camera grid and set Camera Tour Interval at 2 seconds, the first 9 cameras will be shown for 2 seconds,
then the remaining 3 cameras for another 2 seconds. The circulation continues until manually stopped.
9. Set Alarm Tour Mode: Simple or Salvo
Alarm Tour takes effect when grids assigned as alarm video channels are all occupied, and new alarm
associated video is ready for display. Under Simple Mode, old alarm associated channels will be replaced
by new ones. Under Salvo Mode, alarm associated channels will go into carousel and be displayed
continuously until the alarm is closed.
Camera Tour of a view will be stopped when Alarm Tour starts.
10. Click OK to save settings.
View groups can also be saved directly from the Matrix List. Click the Save view group button to do
this. Refer to p.90 for more Matrix settings.