LevelOne FCS-9900 - Manual (Page 52)

52
3. All Views will be under Available Views. Select the Views you want to add to the View Tour and press
. Press to remove selected Views.
4. Use the buttons and to adjust sequence of Views
5. Set Carousel Interval.
6. Select an Alarm View. When alarms are triggered and alarm related video is ready to be displayed on reserved
grids, View Tour will stop on the selected Alarm View to display the video. For more information, please refer to p.
50 on assigning alarm video channels to show video on event.
7. Click OK to save settings.
To load a View Group / View / View Tour:
1. Go to Operate Mode.
2. Go to the View Group List under the System
Control Window.
3. To display all Views of a View Group, right click on any of the
Groups and choose Load on Matrixes.
4. To display one specific View or View Tour, right click on the View / View
Tour and choose Show on Matrix.
To assign users to an initial matrix view group upon startup:
1. Go to Edit Mode.
2. Right click on a specific user under Configuration under the System Control Window.
3. Click on Edit user.
4. Under User Configuration, choose a view group from the drop down list under Initial View Group.
This View group will be started automatically when this user logs in.
To rename a View / Grid Tour / View Group / View Tour:
1. Right click on the icon and label under Edit Mode.
2. Click on Rename.
To remove a View / Grid Tour / View Group / View Tour:
1. Right click on the icon and label under Edit Mode.
2. Click on Delete.
To edit a View / Grid Tour / View Group / View Tour:
1. Right click on the icon and label under Edit Mode.