LevelOne FCS-9900 - Manual (Page 72)

72
To view recorded video from the alarm source camera:
1. Right-click on any alarm event in the Alarm Overview window, then click Alarm Management.
2. Click Recorded Video . The Remote Playback Window has full playback controls.
3. Click Snapshot button . The snapshot is displayed and users can save the image or copy it to the clipboard.
4. Click Export Video button to save recorded video.
 Set up the cue in and cue out points; the cue in and cue out time will show on the information window.
 Click Export Video button, choose the folder where you want to save the file at, enter the file name and click
SAVE.
 Set the Export Format as ASF or AVI (ASF recommend) and set the Use Profile.
 Select to export (i.e. save) the record video with Audio, OSD and metadata display, or export video only.
 Click OK to save the video.
5. If you want to fix the window size at the original resolution, check Fix original video resolution .
6. If the camera is equipped with Audio function, the Audio button will appear. Click to enable audio stream.
7. If the camera is associated to metadata devices, the Metadata button will appear. Click the button to disable
metadata display.
8. Click on the Digital PTZ button to enable Digital PTZ. Zoom in and out with your mouse wheel and drag to
Pan / Tilt.
9. If the camera supports ImmerVision Lens and was correctly configured in Main Console, the Switch to
ImmerVision button will appear. Click on the arrow to select between Original / Quad Mode / PTZ Mode
/ Parameter Mode.
The default alarm playback period is 20 seconds, including 5 seconds prior to the event and 15 seconds
after. This can be modified in Edit – CMS Client Setting – Instant Playback Setting. Alternatively you
can use Remote Playback system which has full playback controls. Go to Remote Playback under Tools.