LevelOne FCS-9900 - Manual (Page 35)

35
1. Right-click the indicator or right-click the device from MapView.
2. Click Rotate and choose an angle (preset angle 0, 45, 90, 135, 180, 225, 270, or 315 degrees).
The radian, range, color and area of Camera Indicator can be set to show camera coverage.
To rotate a device indicator to an arbitrary angle:
1. Right-click the indicator or right-click the device form MapView, or click icon from Edit toolbar.
2. Click Rotate Arbitrary.
3. Use the rotation handle to rotate the indicator to the desired angle, then click to fix the angle.
4. Click Rotate Arbitrary again to close this option.
To mirror a device indicator:
Indicator images can be mirrored (flipped horizontally) so that a mirror image is displayed. One use would be to show in
which direction a camera is pointing. For example, a default image may show a camera pointing left.
1. Right-click the indicator or right-click the device form MapView.
2. Click Mirror.
3. Mirroring would then have it facing right.
The mirror command is a toggle. To un-mirror a previously mirrored indicator, follow steps 1 and 2 again.
To change a device indicator image:
1. Right-click the indicator or right-click the device form MapView.
2. Click Settings.
3. Select the indicator image you want, then click OK.
To import a new indicator image, see page 33.
To remove a device indicator from a map:
1. Right-click the indicator or right-click the device form MapView.
2. Click Delete.
3. Click Yes in the confirmation window.