Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 123)

PETracer EML User Manual Chapter 8: Recording Options
LeCroy Corporation
115
8.6 Recording Rule Limits
PETracer EML has finite buffer resources that limit the number of actions and events that
can be assigned for each recording channel. When creating complex event sequences,
it is possible to hit the limits of these resources and get an error message like the ones
shown in the screenshots below.
In addition to the following limitations, you should also be aware of how PETracer handles
user-created contradictory rules. See “Recording Rules Logic: How Contradictory Rules
are Resolved” on page 116 for an explanation.
In order to maximize the buffer allocation for recordings, LeCroy has imposed the
following configuration limitations into PETracer EML.
Configuration Limitations in PETracer EML
• Four actions per state per channel: See example above.
• Two Link Condition/ Ordered Set resources per channel: See example above.
• Up to four different DLLPs per channel
• Up to three different TLPs per channel
• One error set per channel
• Four payload DWORD-checkers per channel
• Two Timers per channel
• Two counters per channel: No cross channel counting.