Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual User Manual
Page 41
PETracer EML User Manual
Chapter 3: Installation
LeCroy Corporation
33
3.6 Connecting the PETracer EML Analyzer to the
Device Under Test
PETracer EML Components
PETracer EML components used in the installation are:
•
Probe Data Cable (2): Each cable supports x16 data from one direction.
•
PETracer EML x16 Slot Interposer: The slot Interposer provides the point of
attachment for the Analyzer to the Device Under Test (DUT). The Interposer is
designed to fit between a motherboard and one of its cards - for example, a LAN
card. The Interposer has three sets of connectors: a gold male connector that fits
into a standard x16 PCI Express slot on a motherboard, a black female connector
that accepts a x16 PCI Express device such as a graphics card, and two Interposer
cable connectors that connect the Interposer to the Analyzer.
•
USB Cable: Connects the UPAS 100K to the host PC running the PETracer
software.