15 analyzer chat window – Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual User Manual
Page 78
Chapter 4: Software Overview
PETracer EML User Manual
70
LeCroy Corporation
4.15 Analyzer Chat Window
PETracer has a Chat window that allows you to communicate with users on remote PCs.
For Chat to work, two conditions must be met:
1. The PC hosts must have PETracer software installed and running.
2. The hosts must be listed in each other's Network Browse list. This means that your PC
must have the remote PC listed in its Network Browse window and the remote PC must
have your PC listed in its Network Browse window.
If the above conditions are met, a Chat session is initiated by running the command:
View > Analyzer Network Chat Bar. The following dialog opens.
Enter some text, then press Send. The message is then broadcast to all host PCs listed
in your network browse window. If a target PC also lists your PC in its Network Browse
window, then it can receive your message. When the message arrives, the Chat window
automatically opens.