5 deleting user-defined script macros, Icons – Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual User Manual
Page 225
![background image](/manuals/353569/225/background.png)
PETracer EML User Manual
Chapter 11: Macros
LeCroy Corporation
217
11.5 Deleting User-Defined Script Macros
To delete a script macro:
Step 1 Open the Generation Macro Scripts dialog by selecting
Setup > Generation Macros.
Step 2 Select the macro you want to delete and press the Delete button:
All deleted scripts and icons are removed from GenScriptMacros directory. A
backup copy is stored in the GenScriptMacros\Deleted directory.
Note: You cannot delete the Connect and Disconnect script macros.
11.6 Restoring the Default Appearance of the Connect
and Disconnect Icons
You can restore the default appearance of the Connect and Disconnect icons by clicking
the Restore button.
Step 1 Open the Generation Macro Scripts dialog by selecting
Setup > Generation Macros.
Step 2 Select the macro you want to restore and press the Restore button.