Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 213)

PETracer EML User Manual Chapter 10: Traffic Generation
LeCroy Corporation
205
FCRx Parameter Values Default Comment
Enable Tx Flow Control Yes
No Yes When not set, the TLPs are being sent without
the regard of how many credits are available.
This option prevents TLP transmission if
insufficient credits are available.
Enable Rx Flow Control In ns 
(rounded to nearest 8)
Off
4200 When enabled, allows automatic updating of
these DLLPs.
This option enables a periodic timer that
controls sending of UpdateFC DLLPs. You
should leave timer and credit values to
defaults for correct behavior.
PH 0 to 255 1 Posted Request Headers
NPH 0 to 255 1 Non-Posted Request Headers
CplH 0 to 255 1 Completion Headers
PD 0 to 4095 1024 Posted Request Data Payload
NPD 0 to 4095 1 Non-Posted Request Data Payload
CplD 0 to 4095 1024 Completion Data Payload