Teledyne LeCroy PETracer EML Analyzer and Exerciser User Manual - Manual (Page 239)

PETracer EML User Manual Chapter 14: Updates and Licensing
LeCroy Corporation
231
Chapter 14: Updates and Licensing
14.1 Updating the Analyzer
BusEngine™ and/or Firmware updates are now automatic processes that run anytime a
new version of the PETracer™ software is installed that is incompatible with the currently
installed BusEngine or Firmware. The update process generates onscreen instructions.
If, however, you need to manually perform BusEngine or Firmware updates, follow these
steps:
Step 1 Select Setup > Update Device … from the menu to display the
Update Analyzer dialog box for PETracer EML™:
Step 2 Select the appropriate file locations for the Firmware and/or BusEngine,
using Browse, if necessary.
Step 3 Check the appropriate options (if in doubt, check all options).
Step 4 Click Update to initiate the updating of the Analyzer.
Updating the Exerciser
To manually update the BusEngine and/or Firmware for PETrainer ML or PETrainer EML,
follow the same steps as above.