Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 126)

Chapter 7: Display Options Summit User Manual
118
Teledyne LeCroy
7.4 Load a Previously Saved Display Options File
If you have previously saved Display Options, you can load them by opening the Display
Options dialog and clicking the Load button. A dialog box opens to let you load a
previously saved display options file.
Step 1 Click Load to use a previously defined display options file.
Step 2 When you see the Open File pop-up window, enter the name of the file
you want to load and click Open.
Step 3 When the PETracer™ software returns you to the Recording Options
menu, click OK to activate the display options you selected.
7.5 Saving Display Options
If you have customized the Display Options and wish to save them, you can do so by
clicking the Save button, then entering a unique file name. The .opt extension is added
by default.
Setting the Defaults: Save the currently specified Display Options to the file name:
default.opt by clicking Save As Default. When the Analyzer software begins execution,
it automatically loads the default.opt file, if one exists.