Chapter 8: recording options, 1 setting recording options, 2 general tab – Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual User Manual
Page 127: Chapter 8, Recording options, 1 setting recording options 8.2 general tab
Advertising
Summit User Manual
Chapter 8: Recording Options
Teledyne
LeCroy
119
Chapter 8: Recording Options
8.1 Setting Recording Options
The Recording Options dialog is used to configure a recording.
To open the Recording Options window, click
or select the command
Setup > Recording Options.
Note: There are separate sets of Recording Options for each Analyzer type. To set
the Analyzer type, select the appropriate platform from the Target Analyzer
menu in the General page of the Recording Options.
8.2 General Tab
The General Page presents options that affect all recordings:
Figure 1: PETracer Summit or Summit T2-16 in Simple Mode:
Advertising