Chapter 6: searching catc traces, 1 catc trace search overview, 2 go to trigger – Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual User Manual
Page 91: 3 go to packet, Chapter 6, Searching catc traces
Advertising
Summit User Manual
Chapter 6: Searching CATC Traces
Teledyne
LeCroy
83
Chapter 6: Searching CATC Traces
This chapter describes how to search for CATC Trace events.
6.1 CATC Trace Search Overview
Several search commands let you navigate a CATC Trace view to search for key events,
such as errors and triggers.
To view the search options, click Search in the Menu bar.
6.2 Go to Trigger
To position a trigger packet at the top of the screen:
•
Select Search > Go to Trigger.
6.3 Go to Packet
To position a packet at the top of the screen:
Step 1 Select Go to Packet from the Search menu. A pop-up menu prompts
you for the packet number, marker, or time.
Step 2 Enter the packet number, marker, or time.
Step 3 Click OK.
Advertising