Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 80)

Chapter 4: Software Overview Summit User Manual
72
Teledyne LeCroy
4.15 Analyzer Chat Window
PETracer has a Chat window that allows you to communicate with users on remote host
machines. For Chat to work, two conditions must be met:
1. The host machine must have PETracer software installed and running.
2. The host machines must be listed in each other's Network Browse list. This means that
your host machine must have the remote host machine listed in its Network Browse
window and the remote host machine must have your host machine listed in its Network
Browse window.
If the above conditions are met, a Chat session is initiated by running the command:
View > Analyzer Network Chat Bar. The following dialog opens.
Enter some text, then press Send. The message is then broadcast to all host machines
listed in your network browse window. If a target host machine also lists your host
machine in its Network Browse window, then it can receive your message. When the
message arrives, the Chat window automatically opens.