Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 21)

Summit User Manual Chapter 2: Hardware Description
Teledyne LeCroy
13
2.4 PETracer Summit Front Panel Description
When powered on, the PETracer Summit activates the user-accessible controls and
LEDs on the front and rear panels.
Warning! Do not open the enclosure. There are no operator serviceable parts inside.
Refer servicing to Teledyne LeCroy.
The controls and LEDs are:
• Power Switch (black): 1 = On and 0 = Off.
• LCD Menus: Allows you to set up the PETracer Summit and view status. See “LCD
Menus” on page 14.
• Up Arrow (top blue button): Move up in the LCD menu.
• Select (middle blue button): Select or change an option.
• Down Arrow (bottom blue button): Move down in the LCD menu.
• Record LED: Lights when the PETracer Summit is recording.
• Trigger LED: Lights when the PETracer Summit triggers on an event.
• Status LED: Displays Analyzer status: blue = good or red = error.
• Manual Trigger (right blue button): Forces a trigger.
• UPSTREAM 1 (lanes [7:0]) and UPSTREAM 2 (lanes [15:8]) connectors:
Connection to the Pod for the capture of upstream direction of the link.
• DOWNSTREAM 1 (lanes [7:0]) and DOWNSTREAM 2 (lanes [15:8]) connectors:
Connection to the Pod for the capture of downstream direction of the link.