Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 200)

Teledyne LeCroy TxRx Vout & Preemphasis
198 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Figure 3.123: SAS: Assign SAS Address Alias
Assign a meaningful name to each SAS address in use and click OK. The assigned names
replace the SAS address in the sample view, Search, filter,. and Statistical report.
Figure 3.124: SAS: SAS Address Alias
If you elect to save the captured sample file, the assigned SAS address names are saved
together with the result, so that when you open the sample file later, the assigned names
are retained.
Set As Default
If you want to set these SAS address aliases for sample files that will be captured later,
you can set them as default, and new samples will be opened by these default SAS
address aliases.
3.14 TxRx Vout & Preemphasis
The analyzer incorporates the ability to select TX Vout for the transmitter on each port.
Selecting TX Vout increases the output voltage swing above the nominal value, for test