Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 99)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 97
Analyzer Settings Teledyne LeCroy
Note: To display the current Port Configuration, click the green button in the lower right corner to
display the Port Status window (see “Port Status” on page 188 ).
2.15.9 Port Configuration and Projects
Port Configuration depends on Project selected.
Performance Analyzer and Performance Analyzer with do not use ports.
Protocol Analyzer has the following port configuration.
2.15.10 Add a Project Note
To enter and save information about the current project, click the Notes tab and enter the
data about the project.
Figure 2.69: Project Notes Tab
Project Number
Protocol Analyzer Port 1.