Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 56)

Teledyne LeCroy Patterns and Data Capture Setup
54 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Figure 2.15: SAS: Post-trigger Capture Dialog Enabled
SAS vs. SATA: SATA Dialog replaces “Exclude SATA_CONT” with “Exclude CONT” and
“Exclude SATA_SYNC” with “Exclude SYNC”. SATA Dialog has different Pattern Parameters
(see
“Patterns and Data Capture Setup” on page 51 ).
2.11.4 Defining Patterns
To select an item for capture, either highlight the category and click the Add>> button, or
double‐click the category, to open a corresponding definition dialog. You can define
patterns for specific ports by checking or unchecking the Port ID.
Primitive
Double‐click Primitive (available only if you check Exclude Patterns) to open the Primitive
selection dialog.
Figure 2.16: SAS: Primitive Dialog
Port ID