Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 250)

Teledyne LeCroy Scenario Actions
248 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
1
Only shown in Action Properties dialog box when creating a sequence.
4.6.1 Available Resources
You can specify Events, Combined Events and Actions and additional Events. The
application automatically checks for the maximum number of terms (Events/Actions).
When you exceed the limit, an error is flagged, prompting you to jump to the place that
caused the error.
The list of available resources is given below:
 External Trigger X 1
 Analyzer Trigger X 1
 Training Detector x 4 (only M12x)
 Primitive Detector (each has its own Embedded counter in M12x) X 8
 Pattern Detector (each has its own Embedded counter in M12x) X 8 (a total of 12
DWORD detectors are shared between all pattern detectors)
 Frame Type Detector X 24
 Counter X 12
 Timer X 8
 OOB X 1
 ComWakeDetected X 1
 ComWakeCompleted X 1
 ComInitDetected X 1
 ComInitCompleted X 1
 ComSasDetected X 1
 ComSasCompleted X 1
 Snw1 X 1
 Snw2 X 1
 Snw3 X 1
 SnwFinal X 1
 SnwTrain X 1
 DisparityError X 1
 10B Error X 1
 CrcError X 1
 Both Links Up X 1
 Link Speed 3G X 1
 Link Speed 6G X 1
 Link Speed 12G X 1
 Primitive Substitute X 12
 Insert Frame1 (Up To 1024 Dword) X 1
 Insert Dword8 (Up To 16 Dword) X 8
 SNW Manipulation X 16
 Global Action Register X 8
Trigger Output Sends a signal out the trigger port to the device
downstream.
Action Description