Teledyne LeCroy WaveStation SCPI Command Reference Manual - Manual (Page 12)

WaveStation SCPI
SCPI Command Reference
*IDN? - Identification Query
DESCRIPTION The *IDN? query retrieves the instrument’s identification data. Response includes
manufacturer, model, serial number, software and firmware versions.
SYNTAX
*IDN?
RESPONSE
*IDN <device id>,<model>,<serial number>,<software version>,
<firmware version>
<device id>:= WST is used to identify instrument.
<model>:= A model identifier (less than 14 characters).
<serial number>:= A nine- or 10-digit decimal code.
<software version>:= Software version.
<firmware version>:= Two digits giving the major release level followed by a
period, then one digit giving the minor release level followed by a period, and a
single-digit update level (xx.y.z).
EXAMPLE Read version information.
*IDN?
Return:
*IDN WST,WaveStation 2052,LCRY0000C11111,1.01.02.28,
02-00-00-21-24
*OPC - Operation Complete Command
DESCRIPTION The *OPC (OPeration Complete) command sets the OPC bit to TRUE in the
standard Event Status Register (ESR).
The *OPC? query always responds with the ASCII character 1 because the device
only responds to the query when the previous command has executed completely.
SYNTAX
*OPC
QUERY SYNTAX
*OPC?
RESPONSE
*OPC 1
RELATED *WAI
10 922829 Rev C