Labview driver – Teledyne LeCroy WaveStation SCPI Command Reference Manual User Manual
Page 8

WaveStation SCPI
LabView Driver
Either the USB or GPIB interface can be utilized with the free LabView Driver to remote control the
WaveStation using LabView projects. To install the driver:
1. Download the driver from teledynelecroy.com/support/softwaredownload/ under Waveform
Generator Downloads > Software Utilities.
2. Copy the .zip archive to C:\Program Files 86\ NI\LabView2012\instr.lib on the PC hosting
LabView.
3. Unzip the archive and open the .lvproj file. There are three example LabView projects in this
folder that you can use to set up your own LabView workflow.
4. In the LabView software:
• Select USB or GPIB interface, depending on your connection type.
• In VISA resource, select the connected WaveStation Unit.
Waveform files saved in the WaveStation PC Software must be saved in SendWave CSV format to be
exchanged with LabView.
6
922829 Rev C