Vanguard CT-3500 - Manual (Page 15)

Model CT-3500

Operating Procedures
11
g. Press key 1 (YES, print test results) if
a timer results paper record is to be
printed, in which case the printing
advisory (below) displays. If YES, go to
the next step.
h. Press key #2 (NO, don’t print the test
results) to bypass the printing phase, in
which case the SAVE THIS SHOT?
prompt displays. If NO, go to step n.
i. While the printer is printing no other
action is required of the operator until
printing is complete, after which the
SAVE THIS SHOT? prompt displays (see
below):
j. Press key #1 (YES) to save the timing
shot in memory for future reference, in
which case the save is confirmed by the
next display (see below). If Key #2 (NO)
is pressed, the run-test timing is completed
and the display returns to the START-UP
menu.
k. When the shot number displays (the
shot is automatically numbered by the CT-
3500), press ENTER: the display returns
to the START-UP MENU. This step
completes the RUN TEST procedure.
Figure 5.0 A typical CT-3500 OPEN Test print out
PLEASE WAIT
PRINTING…
SAVE THIS SHOT?
1. YES
2. NO
SHOT NUMBER 01
HAS BEEN SAVED!