Vanguard CT-7000 S3 - Manual (Page 13)

REV 1 CT-7000 S3 USER’S MANUAL
8
2.0 PRE-TEST SETUP
2.1 LCD Screen Contrast Control
To increase the LCD screen contrast, press and hold the
[]
key for two seconds. Release the
button when the desired contrast level has been reached.
To decrease the LCD screen contrast, press and hold the
[]
key for two seconds. Release the
button when the desired contrast level has been reached.
2.2 Printer Paper Control
To advance the thermal printer paper, press and release the
[]
key.
To retract the thermal printer paper, press and release the [] key.
2.3 Printer Paper
The CT-7000 S3’s built-in thermal printer uses 4.5-inch wide thermal paper for printing test
results. To maintain the highest print quality and to avoid paper jams, the use of thermal paper
supplied by Vanguard Instruments Company is highly recommended. Additional paper can be
ordered from the following sources:
Vanguard Instruments Co, Inc.
1520 S. Hellman Avenue
Ontario, CA 91761
Tel: 909-923-9390
Fax: 909-923-9391
Part Number: VIC TP-4 paper
BG Instrument Co.
13607 E. Trent Avenue
Spokane, WA 99216
Tel: 509-893-9881
Fax: 509-893-9803
Part Number: VIC TP-4 paper