Vanguard CT-7000 S3 - Manual (Page 86)

CT-7000 S3 USER’S MANUAL REV 1
81
3.4.4. Recalling a Test Record from the Flash EEPROM
Follow the steps below to recall a test record from the CT-7000 S3’s Flash EEPROM:
a. Start from the “START-UP” menu:
Press the
[3]
key (SAVE/RESTORE).
b. The following screen will be displayed:
Press the [2] key (RESTORE SHOT).
c. The following screen will be displayed:
Using the keypad, type the record number that you would like to restore. If you do not
know the record number, you can first print a test record directory using the
instructions in section 3.4.2. Press the
[ENTER] key.
d. A confirmation screen will be displayed with some details about the selected test as
shown below:
Press the [ENTER] key.
RESTORING SHOT #1
TEST: LIVE OPEN
DATE: 09/17/13 10:29
"ENTER" TO PROCEED
ENTER SHOT NUMBER
TO BE RESTORED
"ENTER" TO PROCEED
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
1. TIME BREAKER 09/17/13
2. GET RESULTS 10:10:10
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS