Vanguard CT-7000 S3 - Manual (Page 67)

REV 1 CT-7000 S3 USER’S MANUAL
62
Press the [1] key (OPEN).
e. The following screen will be displayed:
Press the [START] key.
f. The following screen will be displayed temporarily:
Then the following screen will be displayed:
The unit will wait for the external trigger.
g. Once an external trigger is sensed, the test results will be stored in the working memory
and you will be returned to the "START-UP" menu. Use the instructions in section 3.3.5
to print the test results. Sample on-line timing test results printouts are shown in Figure
20 and Figure 21.
AWAITING TRIGGER...
TESTING IN PROGRESS...
-> NO INITIATE CABLES
-> EXTERNAL TRIGGER
ONLY!
"START" TO BEGIN
"STOP" TO ABORT