Vanguard CT-7000 S3 User Manual
Page 65
Advertising
REV 1 CT-7000 S3 USER’S MANUAL
60
i. The following screen will be displayed:
Hold down the
[ARM]
switch and press the
[START]
key.
j. The following screen will be displayed:
Continue to hold down the
[ARM]
switch until testing is finished. You will be returned
to the “START-UP” menu once testing is finished. See Figure 18 and Figure 19 for a
sample O-C-O test results graph and tabulated test results printout, respectively.
TEST IN PROGRESS
HOLD "ARM" UNTIL
TEST COMPLETES.
(UP TO 25 SECONDS)
HOLD "ARM" UNTIL
TEsT COMPLETES.
"START" TO BEGIN
"STOP" TO ABORT
Advertising