Vanguard EZCT-2000 - Manual (Page 23)

REV 3 EZCT-2000 USER’S MANUAL
19
The following screen will then be displayed:
When the ratio test is complete, the final results will be displayed:
Press any key on the keypad to continue.
o. The following screen will be displayed:
Press the [1] key (YES) if you would like to print the test results. The test results will be
printed on the thermal printer. A typical EZCT-2000 tabulated test report printout is
shown in Figure 6. Typical graphic reports are shown in Figure 7 and Figure 8.
Press the
[2]
key (NO) if you do not want to print the test results.
p. The following screen will be displayed:
Press the [1] key (YES) to keep the test results.
KEEP THIS TEST?
1. YES
2. NO
PRINT TEST RESULTS?
1. YES
2. NO
ANY KEY TO CONTINUE
Vx= 79.5 Vh= 0.3970
I=0.0532 RAT=+200.09
RATIO TEST
Vx= 79.5 Vh= 0.3970
I=0.0532 RAT=+200.09
CABLES ENERGIZED:
1200V 1.0A X1-X2
I=0.0004 AMPS
V=34.2 VAC