Vanguard EZCT-2000 - Manual (Page 46)

EZCT-2000 USER’S MANUAL REV 3
42
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
3. UNLOAD TEST PLAN
Press the [3] key to unload the test plan and run a test without a test plan. This
will unload the test plan from the working memory and bring up the standard
“RUN TEST” menu. Please see section 3.3.2, step b.
c. The following screen will be displayed:
Use the alpha-numeric keys on the keypad to enter a test note and press the [ENTER]
key.
d. The following confirmation screen will be displayed showing the test parameters:
Press the
[START]
key to begin the test.
e. The EZCT-2000 will start performing the test per the test plan parameters. When the
test has finished, the following screen will be displayed:
Press any key to continue.
ANY KEY TO CONTINUE
Vx=77.6 Vh=0.3876
I=0.0522 RAT=+200.08
TEST 1 PARAMETERS:
300V 2.0A X1-X2
“START” TO BEGIN
ENTER TEST 1 NOTE:
↑/↓ TO POSITION
“ENTER” TO ACCEPT
RECORD NUMBER 2
HAS BEEN SAVED!
SAVING RECORD...
PLEASE WAIT...