Vanguard EZCT-2000B User Manual
Page 100
EZCT-2000B USER’S MANUAL
REV 1
96
4.4
Printing Raw Memory Buffer Data
You can print the raw data from the EZCT-2000B’s memory buffer for diagnostic purposes. This
will print a table of current and voltage values stored in the unit’s working memory. To print the
raw buffer data:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[6]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[4]
key (PRINT RAW DATA). The raw buffer data will be printed and you will be
returned to the “START-UP” menu.
1.
SET TIME
2.
buried ct in delta
3.
knee point marker
4.
print raw data
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RES RECORD
5.
ERASE RECORD
6. NEXT PAGE
1.
RUN TEST 06/17/09
2.
SETUP 10:14:25
3.
TEST PLANS
4.
DIAGNOSTICS
5.
CURRENT SOURCE