Vanguard EZCT-2000B - Manual (Page 37)

REV 1 EZCT-2000B USER’S MANUAL
33
Then, the following screen will be displayed:
Print the [1] key (YES) if you would like to print the test results. The test results will be
printed on the thermal printer. A typical burden test results report is shown in Figure 11.
Press the [2] key (NO) if you do not want to print the test results.
h. The following screen will be displayed:
Press the [1] key (YES) to keep the test results.
i. The following screen will be displayed:
Press the
[ENTER]
key to continue.
j. The following screen will be displayed:
Press the
[2]
key (NO).
RUN ANOTHER TEST?
1. YES
2. NO
TEST 1 SAVED
KEEP THIS TEST?
1. YES
2. NO
print test results?
1. YES
2. NO