Vanguard EZCT-2000B User Manual
Page 99
REV 1 EZCT-2000B USER’S MANUAL
95
4.3
Setting the Clock
To set the EZCT-2000B’s internal clock:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[6]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[1]
key (SET TIME).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
mm-dd-yy hh:mm:ss
_
1.
SET TIME
2.
buried ct in delta
3.
knee point marker
4.
print raw data
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RESTORE RECORD
5.
ERASE RECORD
6.
NEXT PAGE
1.
RUN TEST 06/17/09
2.
SETUP 10:14:25
3.
TEST PLANS
4.
DIAGNOSTICS
5.
CURRENT SOURCE