Vanguard EZCT-2000B - Manual (Page 62)

EZCT-2000B USER’S MANUAL REV 1
58
3.4.7. Erasing Test Records From the Flash EEPROM
You can erase individual or all test records stored in the EZCT-2000B’s Flash EEPROM. To erase
a test record:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[5]
key (ERASE RECORD).
c. The following screen will be displayed:
NOTE
The above screen will be displayed only if a USB Flash drive is NOT connected
to the EZCT-2000B’s USB Flash drive port. If a USB Flash drive is connected,
the following screen will be displayed:
Press the
[1]
key (ERASE INTERNAL REC). The following screen will be
displayed:
1. ERASE INTERNAL REC
2. ERASE THUMB DRV REC
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 06/17/09
2. SETUP 10:14:25
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE