Vanguard EZCT-2000B - Manual (Page 52)

EZCT-2000B USER’S MANUAL REV 1
48
3.4.3. Printing a Restored Test Record
You can print a test record at the time that it is restored from the Flash EEPROM (see section
3.4.1), or you can restore it to the working memory and print it later. To print the current test
record in the working memory:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (PRINT RECORD).
c. The following screen will be displayed:
NOTE
If there is no test record in the working memory, the following screen will be
displayed:
Press any key to return to the “START-UP” menu. Please see section 3.4.1 for
instructions on how to restore a test record.
NO SHOTS TO PRINT!
PRINT OPTIONS:
1. FULL DATA
2. ABBREVIATED data
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 06/17/09
2. SETUP 10:14:25
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE