Vanguard EZCT-2000B User Manual
Page 40
EZCT-2000B USER’S MANUAL
REV 1
36
c. The following screen will be displayed:
Press the
[7]
key (INSULATION TST ONLY)
d. The following screen will be displayed:
Use the alpha-numeric keypad to enter a test note and then press the
[ENTER]
key.
e. The following screen will be displayed:
Select the test voltage by pressing either the
[1]
key (500V) or the
[2]
key (1000V).
f. The following screen will be displayed:
Connect the insulation resistance cables and then press the
[START]
key.
TEST 1 PARAMETERS
500V INS RES TEST
CONNECT INS REST TEST
CABLES NOW.
"START" TO BEGIN
INS RES TEST VOLTAGE:
1.
500V
2.
1000V
ENTER TEST 1 NOTE:
_
↑↓
to position
"ENTER" TO ACCEPT
1.
Res, excit & ratio
2.
excitation & ratio
3.
excitation only
4.
ratio only
5.
resistance & excit
6.
burden test only
7.
insulation tst only