ZOLL E Series Monitor Defibrillator Rev M - Manual (Page 39)

12-Lead Parameters
9650-1201-01 Rev. M 33
12 Lead Secs Per Lead
This parameter allows you to set the number of seconds of ECG data printed for each lead on
the 12-lead 4x3 strip. This setting affects only 12-lead reports generated by pressing the
Acquire softkey.
Values are as follows:
12 Lead Print Speed
This parameter allows you to set the print speed of the 12-lead 4x3 reports. This setting affects
only 12-lead reports generated by pressing the Acquire softkey.
Values are as follows:
PTCA Message Enabled
This parameter allows you to review, or make changes to, Percutaneous Transluminal Coronary
Angioplasty (PTCA) settings if the E Series unit includes the 12-Lead Reperfusion Algorithm
option. It determines whether or not the E Series unit prints a PTCA message (if appropriate).
Values are as follows :
Possible Values: 2.5, 5.0, 7.5, 10.0 seconds
Default: 2.5 seconds
Possible Values: 25 mm/second, 50mm/second
Default: 25 mm/second
Possible Values: Yes, No
Default: Yes