IEI Integration IOWA-LX-600 - Manual (Page 102)

IOWA-LX-600 Half-size CPU Card
Page 88
IrDA IrDA compliant serial infrared port
ASKIR Amplitude shift keyed infrared port
Normal (Default) RS-232C serial port
RxD, TxD Active [Hi, Lo]
The RxD, TxD Active option can only be selected if the UART Mode Select option is set
to IrDA mode or ASKIR mode. Use the RxD, TxD Active option to set the infrared
reception (RxD) and transmission (TxD) polarity. The RxD, TxD Active options are:
Hi, Hi
Hi, Lo (Default)
Lo, Hi
Lo, Lo
IR Transmission Delay [Enabled]
Use the IR Transmission Delay option to specify whether or not there should be a delay
for the IR transmission.
Disabled There is no transmission delay.
Enabled (Default) There is a transmission delay.
UR2 Duplex Mode [Normal]
Use the Parallel Port Mode option to select parallel port operation mode.
Full Full-duplex mode allows transmission in both directions
at the same time.
Half Default Half-duplex mode allows transmission in one direction
at a time only.
Use IR Pins [IR-Rx2Tx2]
Use the Use IR Pins options to specify how the IR pins respond. The Use IR Pins options
are: